Category: Momentum

What Did We Test?

When the conditions for entry are met, the strategy will exit either when the price drops to the 10-day low or when a trailing stop is reached, set at twice the Average True Range (ATR). The ATR is a measure of market volatility, providing a dynamic stop that adjusts based on recent price fluctuations.

What Happened?

One significant caveat of this backtest is that while it generated a positive overall return, the strategy exhibited a maximum drawdown of 25.63%. This decline was notably less severe compared to the 60.66% maximum drawdown of the equal-weight buy-and-hold basket and 35.12% of the QQQ index, indicating better risk management in this regard. Despite this, the strategy’s overall performance did not match the benchmarks, highlighting the importance of evaluating risk alongside return.

How Did It Compare With the Benchmarks?

The strategy executed a total of 152 trades during the backtest period from January 1, 2016, to January 1, 2025. It achieved a total return of 107.89%, which translates to a compounded annual growth rate (CAGR) of 8.47%. However, this performance lagged behind the benchmark of an equal-weight buy-and-hold basket, which returned 244,286.40%, indicating the strategy underperformed by a significant margin.

The Sharpe ratio stands at 1.34, which means that the returns earned were 1.34 times the volatility taken on. In other words, for each unit of risk, the strategy generated a positive return, suggesting a reasonable risk-reward balance. At the trade level, the absence of closed trades listed means that there are no trade details to analyze; thus, it is hard to gauge specific patterns in profitability or consistency.

The monthly returns reveal that the strategy had 22 positive months compared to 13 negative months, indicating a tendency for more frequent gains. The average return during positive months was higher than the average loss during negative months, specifically demonstrating that gains were stronger on average, this pattern aligns with the strategy’s design to capitalize on upward momentum while managing risk through its exit criteria.

A raw return figure can be misleading because it doesn’t account for the risk taken to achieve those returns. For example, a strategy might return 20% by taking significant risks, but a more modest 10% return could be achieved with much less volatility.

In this backtest, the Sharpe ratio of 1.34 indicates that the strategy generated returns 1.34 times the total volatility, suggesting a reasonable risk-reward balance. The Sortino ratio of 0.13, however, focuses only on downside volatility, revealing that the risk of losing is not well compensated by the upside, which contrasts starkly with the higher Sharpe. The Calmar ratio of 1.08 compares the return to maximum drawdown, further underscoring the strategy’s susceptibility to significant declines.

The "Probability Sharpe > 0" at 99.15% suggests strong statistical confidence that the true Sharpe ratio is positive, which is meaningful. Additionally, since this backtest’s Sharpe ratio is statistically significant, we can trust it provides insightful data. For your own reports, start by comparing the Sharpe and Sortino ratios, followed by the Calmar ratio for a comprehensive risk assessment.

Where Did the Result Come From?

The trade-level significance test indicates that the results should be interpreted with caution. Since there were multiple trades across a few symbols and the p-value reflects the statistical relevance of the results, it is important to note that the nature of overlapping trades means the p-value serves as an indicative measure rather than conclusive evidence.

How Bad Did It Get?

In terms of risk-adjusted return metrics, the Sharpe ratio is 1.34, suggesting that the returns generated were relatively favorable compared to the level of risk taken. However, the Sortino ratio of 0.13 indicates a substantial disparity between upside potential and downside risk. This divergence highlights a caveat: although the total returns are positive, they may not adequately compensate for the risks involved, especially given that the average drawdown length was 17.82 days. This risk profile should give potential traders pause, as it signals that while profits exist, they come with significant volatility.

The integrity audit failed due to two key issues: first, the trade list did not reconcile with the per-symbol trade statistics, indicating a potential mismatch in reported trades. Second, there was no verification of the gross long exposure relative to the portfolio equity, leaving uncertainty about the strategy’s true risk exposure. These failures suggest that the reported performance might not fully reflect reliable trade execution or risk management.

Monthly Returns

Over the tracking period from January 2023 to January 2025, the strategy experienced a mix of monthly returns, with 22 positive months and 13 negative months. The best month was June 2024, which had a return of 24.48%. Conversely, the worst month was January 2025, with a return of -6.33%.

The most significant drawdown occurred between July 11, 2024, and April 16, 2025, where it reached a depth of -25.63%. This episode aligns with the overall trend of returns, showing that significant declines occurred during a challenging market period.

Conclusions

The primary caveat to consider is the considerable maximum drawdown of 25.63%, which indicates potential for substantial losses during the backtest period. Moreover, the integrity audit highlighted issues, particularly regarding the reconciliation of trade statistics, suggesting that the reported figures may not fully reflect reliable trade execution. Always remember, this walkthrough demonstrates past performance and does not predict future results. If you’re interested, feel free to explore your own strategy ideas using quantstr.at.

Ideas to Test Next

The strategy’s maximum drawdown of 25.63% indicates significant risk exposure, which could make it challenging for traders during downturns. Consider adjusting the exit conditions to include a stop-loss to potentially limit losses and manage risk more effectively.

Enter long when the price breaks above the 20-day high and the 10-day EMA is greater than the 30-day EMA. Exit when the price reaches the 10-day low or hits a trailing stop set at twice the ATR, or if the price falls below a stop-loss of 1.5% from the entry price.

More Backtests

• Can Keltner Channel Breakouts Beat Buy-and-Hold? A 3-Year Test on Tech Equities & QQQ
• MACD SMI Trend Following Across Sector & Global ETFs
• Building and Testing an RSI Mean-Reversion Strategy

Setup, Audit & Replication

What Did We Test?

What Happened?

A significant consideration is that the strategy’s results were based on 97 closed trades (+1 still open), which indicates that performance may depend heavily on a limited number of trades. The maximum drawdown for this strategy was approximately 29.9%, compared to the equal-weight benchmark’s max drawdown of 28.9%, suggesting a slightly worse risk profile.

How Did It Compare With the Benchmarks?

The Keltner Channel Volatility Breakout strategy generated a total return of 107% over the 3-year period, resulting in an ending equity value of approximately $207,035 from an initial equity of $100,000. The strategy executed 97 closed trades, with a win rate of about 41%. When compared to the equal-weight buy-and-hold strategy for the same stocks, which achieved a total return of 166%, this strategy lagged significantly by approximately 59%. However, it outperformed the SPY buy-and-hold strategy, which returned 77%, by around 30%.

The Sharpe ratio of 1.12 indicates that the strategy earned 1.12 units of return for every unit of risk taken, which is generally considered acceptable in quantitative trading. At the trade level, the average closed-trade profit and loss was about $1,107. While some trades were profitable, the distribution revealed that a small number of large gains were responsible for a significant portion of the overall profit, indicating a "few big winners" trading pattern.

Monthly returns averaged about 14 positive months versus 20 negative months, with average gains of around 12% during winning months and smaller average losses of about 3%. This suggests that while the strategy struggled to avoid bad months, it was capable of capturing larger upswings, aligning with its volatility breakout approach. However, the strategy faced a maximum drawdown of 30%, indicating considerable risk during its worst performance period.

Understanding raw return figures can be misleading, as they fail to reveal the underlying risks involved. For instance, a strategy returning 20% with high volatility may not be preferable to one generating 10% returns with a smoother ride. In this backtest, the Sharpe ratio of 1.12 indicates that the strategy earned about 1.12 units of return per unit of total volatility, reflecting an acceptable risk-return trade-off. The Sortino ratio, at 0.11, looks specifically at downside volatility, signaling concerns since it shows that returns aren’t proportionate to the risks incurred when the strategy performed poorly. The Calmar ratio of 0.93 compares returns relative to the maximum drawdown, offering a different angle that emphasizes the substantial drawdown of nearly 30%.

A key metric, "Probability Sharpe > 0," sits at 97.94%, indicating high confidence that the strategy’s true Sharpe ratio is greater than zero, although the minimum track record needed to ensure this confidence is 487 observations. In this case, the Sharpe ratio is statistically significant, meaning it likely reflects a real pattern rather than being a result of chance. When reviewing your own quantstr.at report, it’s useful to examine the Sharpe and Sortino ratios together to understand risk-adjusted returns, followed by the Calmar ratio for additional insights into maximum drawdown.

Where Did the Result Come From?

The significance test indicates that the mean return per trade was 12.22%, with a 95% confidence interval for the mean ranging from -8.03% to 32.46%. The t-statistic was 1.20, and the two-sided p-value was 0.2339, suggesting there isn’t strong evidence that the strategy was definitively effective, primarily due to the small sample size of trades. This means that the returns could be due to random chance rather than a robust underlying strategy.

How Bad Did It Get?

The risk-adjusted return metrics present a mixed picture. With a Sharpe ratio of 1.12, the strategy earned slightly more than one unit of return for each unit of risk taken, which is generally acceptable. However, the Sortino ratio, at 0.11, indicates that the returns were not proportionate to the downside risk. This suggests that while there were some profitable trades, the good months did not sufficiently outweigh the less favorable ones.

An integrity audit revealed some flaws in the backtesting process, specifically regarding exposure checks. The peak gross long exposure exceeded the actual equity in the account. This means that the reported returns might overstate what a strictly unleveraged account could have achieved. Additionally, the failed percentage checks imply that some of the data’s presentation may lack precision. Hence, while the strategy shows promise, caution is warranted when interpreting its performance metrics due to these inherent risks and issues.

Monthly Returns

The backtest reported returns across 37 months, with 14 months showing positive returns, 20 months negative, and 3 months flat. The best month was May 2026, achieving a return of 26%, while the worst was July 2026, with a decline of 7%.

Notably, the largest drawdown episode occurred between July 2024 and April 2025, reaching a depth of 30% over 193 days. This episode aligns with several negative monthly returns, particularly during 2025, which included months of losses.

Conclusions

One major caveat to consider is the maximum drawdown of approximately 30%, indicating significant risk during its worst performance phase. This drawdown required about 60 days to recover, highlighting potential stress for traders. It’s important to note that this analysis is purely for educational purposes, not investment advice, and past performance does not guarantee future results. Readers are encouraged to explore their own strategy ideas using quantstr.at.

Ideas to Test Next

The strategy’s maximum drawdown of 30% indicates significant risk during adverse market conditions. By adding a stop-loss, you may help limit losses during downturns, enhancing risk management and potentially improving overall performance.

Trade QQQ, NVDA, AAPL, MSFT, AMD, and AMZN using a Keltner Channel Volatility Breakout strategy. Enter long when price breaks above the 20-period upper band and 14-period ADX > 25 (confirming trend strength). Exit when price closes below the 20-period EMA center line. Additionally, set a stop-loss to exit the position if losses reach 5%.

More Backtests

• MACD SMI Trend Following Across Sector & Global ETFs
• Building and Testing an RSI Mean-Reversion Strategy
• Does a Market Trend Filter Beat Buy-and-Hold? An Out-of-Sample Test on 989 Stocks

Setup, Audit & Replication

# Load required libraries
library(quantmod)
library(quantstrat)

# Set parameters
start_date <- '2023-08-29'
end_date <- '2026-08-27'
init_equity <- 100000
symbols <- c('QQQ', 'AAPL', 'MSFT', 'NVDA', 'AMD', 'AMZN')

# Get historical data
getSymbols(symbols, from = start_date, to = end_date)

# Initialize the portfolio, account, and orders
initPortf('KeltnerADX', symbols = symbols)
initAcct('KeltnerADX', portfolios = 'KeltnerADX', initEq = init_equity)
initOrders(portfolio = 'KeltnerADX')

# Define the strategy
strategy.st <- 'KeltnerADX'
rm <- 'KeltnerADX'

# Initialize strategy
initStrategy(strategy.st)

# Define indicators
add.indicator(strategy = strategy.st, name = 'EMA', arguments = list(x = quote(Cl(mktdata)), n = 20), label = 'EMA20')
add.indicator(strategy = strategy.st, name = 'KeltnerChannel', arguments = list(HLC = quote(HLC(mktdata)), n = 20, sd = 1.5), label = 'KC')
add.indicator(strategy = strategy.st, name = 'ADX', arguments = list(x = quote(HLC(mktdata)), n = 14), label = 'ADX')

# Define signals
add.signal(strategy = strategy.st, name = 'sigThreshold', arguments = list(column = 'KC.upper', threshold = 0, relationship = 'gt'), label = 'longEntry')
add.signal(strategy = strategy.st, name = 'sigThreshold', arguments = list(column = 'EMA20', threshold = 0, relationship = 'lt'), label = 'longExit')

# Define rules
add.rule(strategy = strategy.st, name = 'ruleSignal', arguments = list(sigcol = 'longEntry', sigval = TRUE, ordertype = 'market', orderside = 'long', replace = FALSE, TxnFees = 0), type = 'enter')
add.rule(strategy = strategy.st, name = 'ruleSignal', arguments = list(sigcol = 'longExit', sigval = TRUE, ordertype = 'market', orderside = 'long', replace = TRUE, TxnFees = 0), type = 'exit')

# Apply the strategy
applyStrategy(strategy = strategy.st, portfolios = 'KeltnerADX')

# Update the portfolio
updatePortf('KeltnerADX')

# Get performance summary
chart.Posn('KeltnerADX', Symbol = 'QQQ')

# Print final portfolio summary
getPortfolio('KeltnerADX')

import yfinance as yf
import pandas as pd
import vectorbt as vbt

# Set parameters
symbols = ['QQQ', 'AAPL', 'MSFT', 'NVDA']
start_date = '2023-08-29'
end_date = '2026-08-27'

# Download historical data
prices = yf.download(symbols, start=start_date, end=end_date)['Adj Close']

# Calculate indicators
ema20 = prices.ewm(span=20).mean()
upper_band = prices.rolling(window=20).mean() + (prices.rolling(window=20).std() * 1.5)
lower_band = prices.rolling(window=20).mean() - (prices.rolling(window=20).std() * 1.5)
adx = vbt.ADX.run(prices, window=14).adx

# Define entry and exit signals
long_entry = (prices > upper_band) & (adx > 25)
long_exit = prices < ema20

# Create portfolio
portfolio = vbt.Portfolio.from_signals(prices, long_entry, long_exit, init_cash=100000)

# Print portfolio stats
print(portfolio.stats())

---
title: "Strategy Replication Guide: Keltner ADX Volatility Breakout Strategy"
format: html
editor: visual
execute:
  eval: false
---

# Overview
This Quarto Markdown notebook provides reproducible R and Python code to replicate the **Keltner ADX Volatility Breakout Strategy** backtest (2023-08-29 to 2026-08-27).

## R Replication (quantstrat)

```{r}
#| label: r-strategy-replication
#| message: false
#| warning: false

# Load required libraries
library(quantmod)
library(quantstrat)

# Set parameters
start_date <- '2023-08-29'
end_date <- '2026-08-27'
init_equity <- 100000
symbols <- c('QQQ', 'AAPL', 'MSFT', 'NVDA', 'AMD', 'AMZN')

# Get historical data
getSymbols(symbols, from = start_date, to = end_date)

# Initialize the portfolio, account, and orders
initPortf('KeltnerADX', symbols = symbols)
initAcct('KeltnerADX', portfolios = 'KeltnerADX', initEq = init_equity)
initOrders(portfolio = 'KeltnerADX')

# Define the strategy
strategy.st <- 'KeltnerADX'
rm <- 'KeltnerADX'

# Initialize strategy
initStrategy(strategy.st)

# Define indicators
add.indicator(strategy = strategy.st, name = 'EMA', arguments = list(x = quote(Cl(mktdata)), n = 20), label = 'EMA20')
add.indicator(strategy = strategy.st, name = 'KeltnerChannel', arguments = list(HLC = quote(HLC(mktdata)), n = 20, sd = 1.5), label = 'KC')
add.indicator(strategy = strategy.st, name = 'ADX', arguments = list(x = quote(HLC(mktdata)), n = 14), label = 'ADX')

# Define signals
add.signal(strategy = strategy.st, name = 'sigThreshold', arguments = list(column = 'KC.upper', threshold = 0, relationship = 'gt'), label = 'longEntry')
add.signal(strategy = strategy.st, name = 'sigThreshold', arguments = list(column = 'EMA20', threshold = 0, relationship = 'lt'), label = 'longExit')

# Define rules
add.rule(strategy = strategy.st, name = 'ruleSignal', arguments = list(sigcol = 'longEntry', sigval = TRUE, ordertype = 'market', orderside = 'long', replace = FALSE, TxnFees = 0), type = 'enter')
add.rule(strategy = strategy.st, name = 'ruleSignal', arguments = list(sigcol = 'longExit', sigval = TRUE, ordertype = 'market', orderside = 'long', replace = TRUE, TxnFees = 0), type = 'exit')

# Apply the strategy
applyStrategy(strategy = strategy.st, portfolios = 'KeltnerADX')

# Update the portfolio
updatePortf('KeltnerADX')

# Get performance summary
chart.Posn('KeltnerADX', Symbol = 'QQQ')

# Print final portfolio summary
getPortfolio('KeltnerADX')
```

## Python Replication (VectorBT)

```{python}
#| label: python-strategy-replication

import yfinance as yf
import pandas as pd
import vectorbt as vbt

# Set parameters
symbols = ['QQQ', 'AAPL', 'MSFT', 'NVDA']
start_date = '2023-08-29'
end_date = '2026-08-27'

# Download historical data
prices = yf.download(symbols, start=start_date, end=end_date)['Adj Close']

# Calculate indicators
ema20 = prices.ewm(span=20).mean()
upper_band = prices.rolling(window=20).mean() + (prices.rolling(window=20).std() * 1.5)
lower_band = prices.rolling(window=20).mean() - (prices.rolling(window=20).std() * 1.5)
adx = vbt.ADX.run(prices, window=14).adx

# Define entry and exit signals
long_entry = (prices > upper_band) & (adx > 25)
long_exit = prices < ema20

# Create portfolio
portfolio = vbt.Portfolio.from_signals(prices, long_entry, long_exit, init_cash=100000)

# Print portfolio stats
print(portfolio.stats())
```